Showing posts with label as. Show all posts
Showing posts with label as. Show all posts

Friday, June 4, 2010

APPLICATIONS OF OHM'S LAW


APPLICATIONS OF OHM'S LAW




As an application of Ohm's law, any voltage V, current I or resistance R in an electrical circuit can be determined without actually measuring it if the two others values are known.

This law can be used to determine the amount of current I flowing in the circuit when voltage V is applied to resistance R. As stated previously, Ohm's law is:

Current = Voltage / Resistance.

In the following circuit, assume that resistance R is 2 and voltage V that is applied to it is 12 V. Then, current I flowing in the circuit can be determined as follows:

Thursday, June 3, 2010

SWOT Analysis of The Electrical Fittings Industry - The Unorganized Sector



SWOT Analysis of The Electrical Fittings Industry - The Unorganized Sector



t is estimated that 50% of the total production in this industry comes from unorganized segment dominated by regional small players. Following is the SWOT analysis of the sector that may help you to understand the industry better:

SWOT Analysis

Strengths (S)

* The Electrical fittings industry is able to get better terms of sales from the market for its strong product mix and affordable price.

* Electrical fitting's manufacturing unit is low cost unit so therefore contains ample opportunity to grow.

Weaknesses (W)

* Electrical fittings manufacturers are currently suffering from a variety of technological obsolescence issues like conventional mould/die making, old/manual molding presses etc.

* The Electrical fittings industry is encountered with Government unfriendly intervention such as labor, social security etc.

* The major portion of the Electrical Fittings industry is concentrated in unorganized sector with most of the small and Cottage industrial units thus hindering their ability to manufacture standardized products.

Opportunities (O)

* Relaxation in duty and tariffs on the import of Bakelite Powder may enhance the ability of the manufacturers to take full advantage of their installed capacity.

* Adequate level of Marketing and Promotion may able the manufacturers to promote their products at international level.

* Institutional infrastructure support in the areas of technological, design, product and human resource development would definitely pave way for development.

* The growth of Electrical Fittings Components sector is also promising.

Opportunities


Threats (T)

* The Electrical Fittings Industry is labor intensive and facing critical labor shortage of skilled workers specially molders.

* Rising raw material costs and low cost imports.

Wednesday, June 2, 2010

Metal Wires


Metal Wires



Metal wires have been used in numerous applications since centuries. It is a thread or slender rod of different metals and their alloys. A metal wire is generally circular in cross section and is flexible.

Metal Wire

Most metal wires are made of several small twisted or woven strands available in varying lengths and diameters. These wires are often insulated carrying current and conducting electricity.

Metal Consideration for Wires
Various metals and their alloys are used for making wires, these metals are used because of certain properties. These include:

* Ductility
* High tensile strength
* Electrical conductivity
* Melting point
* Weight

Different types of metals are used depending on the end application. All metal wires are numbered in order of decreasing size, this number is known as the wire gauge. The higher the gauge of a wire, the smaller the diameter.

There are different wire gages and sizes that are used by different countries. These different as per an individual country's standards of measurement. Various wires are used in numerous applications and products. The wire making industry has evolved and expanded into one of the biggest industries in the 20th century.

Popular Metals Used
There only a few metals that are used for wire making because of the necessary physical properties required for making wires. Some of the commonly used metals for manufacturing wires are:

* Brass
* Bronze
* Silver
* Nickel
* Tungsten


Wire Production Method
Metals wires for various applications are processed and reduced to the desired diameter and properties by repeatedly drawing it through smaller dies, or traditionally through holes in draw plates. The wires are heated in an inert atmosphere for softening and then they are cooled, this process is commonly known as annealing. An inert atmosphere prevents oxidation, although some amount of scaling always occurs and is removed by 'pickling' before the wire is redrawn.

Electrical wires are covered with different insulating materials, including plastic or rubber-like polymers. Two or more insulated wires are again wrapped in a concentric manner and wrapped with paraffin for further protection. Wire insulation and jacketing is done by making them pass through extruders. There are different methods and materials used for manufacturing different types of wires.

Stranded and Solid Metal Wires
Standed WireStranded Wires
A Stranded wire is made of a bundle of small-gauge wires for making a larger conductor, which can also be optionally insulated. These wires are a combination of groups of wires, usually twisted together and are also popularly known as stranded conductors. These wires are more flexible than solid wires of the same total gauge.

Stranded wires are commonly used for various electrical applications carrying small signals, including computer mouse cables, table lamps, powered hand tools, welding electrode cables, mining machines etc.

Solid Wires
Solid wires or solid-core wires consist of single piece of metal wire. Most fixed wiring in residential and commercial buildings is done with solid, single-strand, wire as it is cheaper to manufacture than stranded wire. These also provide strength and protection against the environment.

Soild Wire


Types of Metal Wires

* Brass wires: These wires are excellent conductor of electrical energy and are less prone to corrosion. These wires are available in different dimensions according to the end application.

* Copper wire: High quality cooper and its alloys are used for manufacturing wires that find application in diverse fields. These wires are made as solid or stranded wires depending on the customer's requirements. The wires are supplied in spools and reels.

* Bronze wires: These wires are good conductor of electrical energy and relatively corrosion resistant. These wires are stronger and stiffer than brass wires.

* Silver wires: Insulated silver wires are used for various products like electronic equipment, amplifiers, speakers etc. These wires are available in different thickness, diameter and lengths.

* Nickel wires: These wires are used in numerous industrial applications and are available in various diameters and lengths. They metal is used because of its strength and superior elevated temperature properties.

* Tungsten wires: These wires are expensive and are used in high performance applications areas such as electronics, and electric-furnace industries and lighting. These wires are manufactured in varying diameter and length depending on the end application.

Monday, May 31, 2010

Electrical engineering


Electrical engineering



Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics and electromagnetism. The field first became an identifiable occupation in the late nineteenth century after commercialization of the electric telegraph and electrical power supply. It now covers a range of subtopics including power, electronics, control systems, signal processing and telecommunications.

Electrical engineering may or may not include electronic engineering. Where a distinction is made, usually outside of the United States, electrical engineering is considered to deal with the problems associated with large-scale electrical systems such as power transmission and motor control, whereas electronic engineering deals with the study of small-scale electronic systems including computers and integrated circuits.[1] Alternatively, electrical engineers are usually concerned with using electricity to transmit energy, while electronic engineers are concerned with using electricity to transmit information. More recently, the distinction has become blurred by the growth of power electronics.
Contents
[hide]

* 1 History
o 1.1 Modern developments
* 2 Education
* 3 Practicing engineers
* 4 Tools and work
* 5 Sub-disciplines
o 5.1 Power
o 5.2 Control
o 5.3 Electronics
o 5.4 Microelectronics
o 5.5 Signal processing
o 5.6 Telecommunications
o 5.7 Instrumentation
o 5.8 Computers
* 6 Related disciplines
* 7 See also
* 8 Note
* 9 References
* 10 External links

History
Main article: History of electrical engineering
The discoveries of Michael Faraday formed the foundation of electric motor technology

Electricity has been a subject of scientific interest since at least the early 17th century. The first electrical engineer was probably William Gilbert who designed the versorium: a device that detected the presence of statically charged objects. He was also the first to draw a clear distinction between magnetism and static electricity and is credited with establishing the term electricity.[2] In 1775 Alessandro Volta's scientific experimentations devised the electrophorus, a device that produced a static electric charge, and by 1800 Volta developed the voltaic pile, a forerunner of the electric battery.[3]

However, it was not until the 19th century that research into the subject started to intensify. Notable developments in this century include the work of Georg Ohm, who in 1827 quantified the relationship between the electric current and potential difference in a conductor, Michael Faraday, the discoverer of electromagnetic induction in 1831, and James Clerk Maxwell, who in 1873 published a unified theory of electricity and magnetism in his treatise Electricity and Magnetism.[4]
Thomas Edison built the world's first large-scale electrical supply network

During these years, the study of electricity was largely considered to be a subfield of physics. It was not until the late 19th century that universities started to offer degrees in electrical engineering. The Darmstadt University of Technology founded the first chair and the first faculty of electrical engineering worldwide in 1882. In the same year, under Professor Charles Cross, the Massachusetts Institute of Technology began offering the first option of Electrical Engineering within a physics department.[5] In 1883 Darmstadt University of Technology and Cornell University introduced the world's first courses of study in electrical engineering, and in 1885 the University College London founded the first chair of electrical engineering in the United Kingdom.[6] The University of Missouri subsequently established the first department of electrical engineering in the United States in 1886.[7]
Nikola Tesla made long-distance electrical transmission networks possible.

During this period, the work concerning electrical engineering increased dramatically. In 1882, Edison switched on the world's first large-scale electrical supply network that provided 110 volts direct current to fifty-nine customers in lower Manhattan. In 1884 Sir Charles Parsons invented the steam turbine which today generates about 80 percent of the electric power in the world using a variety of heat sources. In 1887, Nikola Tesla filed a number of patents related to a competing form of power distribution known as alternating current. In the following years a bitter rivalry between Tesla and Edison, known as the "War of Currents", took place over the preferred method of distribution. AC eventually replaced DC for generation and power distribution, enormously extending the range and improving the safety and efficiency of power distribution.

The efforts of the two did much to further electrical engineering—Tesla's work on induction motors and polyphase systems influenced the field for years to come, while Edison's work on telegraphy and his development of the stock ticker proved lucrative for his company, which ultimately became General Electric. However, by the end of the 19th century, other key figures in the progress of electrical engineering were beginning to emerge.[8]
Modern developments

During the development of radio, many scientists and inventors contributed to radio technology and electronics. In his classic UHF experiments of 1888, Heinrich Hertz transmitted (via a spark-gap transmitter) and detected radio waves using electrical equipment. In 1895, Nikola Tesla was able to detect signals from the transmissions of his New York lab at West Point (a distance of 80.4 km / 49.95 miles).[9] In 1897, Karl Ferdinand Braun introduced the cathode ray tube as part of an oscilloscope, a crucial enabling technology for electronic television.[10] John Fleming invented the first radio tube, the diode, in 1904. Two years later, Robert von Lieben and Lee De Forest independently developed the amplifier tube, called the triode.[11] In 1895, Guglielmo Marconi furthered the art of hertzian wireless methods. Early on, he sent wireless signals over a distance of one and a half miles. In December 1901, he sent wireless waves that were not affected by the curvature of the Earth. Marconi later transmitted the wireless signals across the Atlantic between Poldhu, Cornwall, and St. John's, Newfoundland, a distance of 2,100 miles (3,400 km).[12] In 1920 Albert Hull developed the magnetron which would eventually lead to the development of the microwave oven in 1946 by Percy Spencer.[13][14] In 1934 the British military began to make strides toward radar (which also uses the magnetron) under the direction of Dr Wimperis, culminating in the operation of the first radar station at Bawdsey in August 1936.[15]

In 1941 Konrad Zuse presented the Z3, the world's first fully functional and programmable computer.[16] In 1946 the ENIAC (Electronic Numerical Integrator and Computer) of John Presper Eckert and John Mauchly followed, beginning the computing era. The arithmetic performance of these machines allowed engineers to develop completely new technologies and achieve new objectives, including the Apollo missions and the NASA moon landing.[17]

The invention of the transistor in 1947 by William B. Shockley, John Bardeen and Walter Brattain opened the door for more compact devices and led to the development of the integrated circuit in 1958 by Jack Kilby and independently in 1959 by Robert Noyce.[18] Starting in 1968, Ted Hoff and a team at Intel invented the first commercial microprocessor, which presaged the personal computer. The Intel 4004 was a 4-bit processor released in 1971, but in 1973 the Intel 8080, an 8-bit processor, made the first personal computer, the Altair 8800, possible.[19]
Education
Main article: Education and training of electrical and electronics engineers

Electrical engineers typically possess an academic degree with a major in electrical engineering. The length of study for such a degree is usually four or five years and the completed degree may be designated as a Bachelor of Engineering, Bachelor of Science, Bachelor of Technology or Bachelor of Applied Science depending upon the university. The degree generally includes units covering physics, mathematics, computer science, project management and specific topics in electrical engineering. Initially such topics cover most, if not all, of the sub-disciplines of electrical engineering. Students then choose to specialize in one or more sub-disciplines towards the end of the degree.

Some electrical engineers also choose to pursue a postgraduate degree such as a Master of Engineering/Master of Science (MEng/MSc), a Master of Engineering Management, a Doctor of Philosophy (PhD) in Engineering, an Engineering Doctorate (EngD), or an Engineer's degree. The Master and Engineer's degree may consist of either research, coursework or a mixture of the two. The Doctor of Philosophy and Engineering Doctorate degrees consist of a significant research component and are often viewed as the entry point to academia. In the United Kingdom and various other European countries, the Master of Engineering is often considered an undergraduate degree of slightly longer duration than the Bachelor of Engineering.[20]
Practicing engineers

In most countries, a Bachelor's degree in engineering represents the first step towards professional certification and the degree program itself is certified by a professional body. After completing a certified degree program the engineer must satisfy a range of requirements (including work experience requirements) before being certified. Once certified the engineer is designated the title of Professional Engineer (in the United States, Canada and South Africa ), Chartered Engineer (in India, the United Kingdom, Ireland and Zimbabwe), Chartered Professional Engineer (in Australia and New Zealand) or European Engineer (in much of the European Union).

The advantages of certification vary depending upon location. For example, in the United States and Canada "only a licensed engineer may seal engineering work for public and private clients".[21] This requirement is enforced by state and provincial legislation such as Quebec's Engineers Act.[22] In other countries, no such legislation exists. Practically all certifying bodies maintain a code of ethics that they expect all members to abide by or risk expulsion.[23] In this way these organizations play an important role in maintaining ethical standards for the profession. Even in jurisdictions where certification has little or no legal bearing on work, engineers are subject to contract law. In cases where an engineer's work fails he or she may be subject to the tort of negligence and, in extreme cases, the charge of criminal negligence. An engineer's work must also comply with numerous other rules and regulations such as building codes and legislation pertaining to environmental law.

Professional bodies of note for electrical engineers include the Institute of Electrical and Electronics Engineers (IEEE) and the Institution of Engineering and Technology (IET). The IEEE claims to produce 30% of the world's literature in electrical engineering, has over 360,000 members worldwide and holds over 3,000 conferences annually.[24] The IET publishes 21 journals, has a worldwide membership of over 150,000, and claims to be the largest professional engineering society in Europe.[25][26] Obsolescence of technical skills is a serious concern for electrical engineers. Membership and participation in technical societies, regular reviews of periodicals in the field and a habit of continued learning are therefore essential to maintaining proficiency.[27]

In Australia, Canada and the United States electrical engineers make up around 0.25% of the labor force (see note). Outside of Europe and North America, engineering graduates per-capita, and hence probably electrical engineering graduates also, are most numerous in Taiwan, Japan, and South Korea.[28]
Tools and work

From the Global Positioning System to electric power generation, electrical engineers have contributed to the development of a wide range of technologies. They design, develop, test and supervise the deployment of electrical systems and electronic devices. For example, they may work on the design of telecommunication systems, the operation of electric power stations, the lighting and wiring of buildings, the design of household appliances or the electrical control of industrial machinery.[29]
Satellite communications is one of many projects an electrical engineer might work on

Fundamental to the discipline are the sciences of physics and mathematics as these help to obtain both a qualitative and quantitative description of how such systems will work. Today most engineering work involves the use of computers and it is commonplace to use computer-aided design programs when designing electrical systems. Nevertheless, the ability to sketch ideas is still invaluable for quickly communicating with others.

Although most electrical engineers will understand basic circuit theory (that is the interactions of elements such as resistors, capacitors, diodes, transistors and inductors in a circuit), the theories employed by engineers generally depend upon the work they do. For example, quantum mechanics and solid state physics might be relevant to an engineer working on VLSI (the design of integrated circuits), but are largely irrelevant to engineers working with macroscopic electrical systems. Even circuit theory may not be relevant to a person designing telecommunication systems that use off-the-shelf components. Perhaps the most important technical skills for electrical engineers are reflected in university programs, which emphasize strong numerical skills, computer literacy and the ability to understand the technical language and concepts that relate to electrical engineering.

For many engineers, technical work accounts for only a fraction of the work they do. A lot of time may also be spent on tasks such as discussing proposals with clients, preparing budgets and determining project schedules.[30] Many senior engineers manage a team of technicians or other engineers and for this reason project management skills are important. Most engineering projects involve some form of documentation and strong written communication skills are therefore very important.

The workplaces of electrical engineers are just as varied as the types of work they do. Electrical engineers may be found in the pristine lab environment of a fabrication plant, the offices of a consulting firm or on site at a mine. During their working life, electrical engineers may find themselves supervising a wide range of individuals including scientists, electricians, computer programmers and other engineers.
Sub-disciplines

Electrical engineering has many sub-disciplines, the most popular of which are listed below. Although there are electrical engineers who focus exclusively on one of these sub-disciplines, many deal with a combination of them. Sometimes certain fields, such as electronic engineering and computer engineering, are considered separate disciplines in their own right.
Power
Main article: Power engineering
Power pole

Power engineering deals with the generation, transmission and distribution of electricity as well as the design of a range of related devices. These include transformers, electric generators, electric motors, high voltage engineering and power electronics. In many regions of the world, governments maintain an electrical network called a power grid that connects a variety of generators together with users of their energy. Users purchase electrical energy from the grid, avoiding the costly exercise of having to generate their own. Power engineers may work on the design and maintenance of the power grid as well as the power systems that connect to it. Such systems are called on-grid power systems and may supply the grid with additional power, draw power from the grid or do both. Power engineers may also work on systems that do not connect to the grid, called off-grid power systems, which in some cases are preferable to on-grid systems. The future includes Satellite controlled power systems, with feedback in real time to prevent power surges and prevent blackouts.
Control
Main article: Control engineering
Control systems play a critical role in space flight

Control engineering focuses on the modeling of a diverse range of dynamic systems and the design of controllers that will cause these systems to behave in the desired manner. To implement such controllers electrical engineers may use electrical circuits, digital signal processors, microcontrollers and PLCs (Programmable Logic Controllers). Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. It also plays an important role in industrial automation.

Control engineers often utilize feedback when designing control systems. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system which adjusts the motor's power output accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback.
Electronics
Main article: Electronic engineering
Circuit board

Electronic engineering involves the design and testing of electronic circuits that use the properties of components such as resistors, capacitors, inductors, diodes and transistors to achieve a particular functionality. The tuned circuit, which allows the user of a radio to filter out all but a single station, is just one example of such a circuit. Another example (of a pneumatic signal conditioner) is shown in the adjacent photograph.

Prior to the second world war, the subject was commonly known as radio engineering and basically was restricted to aspects of communications and radar, commercial radio and early television. Later, in post war years, as consumer devices began to be developed, the field grew to include modern television, audio systems, computers and microprocessors. In the mid to late 1950s, the term radio engineering gradually gave way to the name electronic engineering.

Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by humans. These discrete circuits consumed much space and power and were limited in speed, although they are still common in some applications. By contrast, integrated circuits packed a large number—often millions—of tiny electrical components, mainly transistors, into a small chip around the size of a coin. This allowed for the powerful computers and other electronic devices we see today.
Microelectronics
Main article: Microelectronics
Microprocessor

Microelectronics engineering deals with the design and microfabrication of very small electronic circuit components for use in an integrated circuit or sometimes for use on their own as a general electronic component. The most common microelectronic components are semiconductor transistors, although all main electronic components (resistors, capacitors, inductors) can be created at a microscopic level. Nanoelectronics is the further scaling of devices down to nanometer levels.

Microelectronic components are created by chemically fabricating wafers of semiconductors such as silicon (at higher frequencies, compound semiconductors like gallium arsenide and indium phosphide) to obtain the desired transport of electronic charge and control of current. The field of microelectronics involves a significant amount of chemistry and material science and requires the electronic engineer working in the field to have a very good working knowledge of the effects of quantum mechanics.
Signal processing
Main article: Signal processing
A Bayer filter on a CCD requires signal processing to get a red, green, and blue value at each pixel

Signal processing deals with the analysis and manipulation of signals. Signals can be either analog, in which case the signal varies continuously according to the information, or digital, in which case the signal varies according to a series of discrete values representing the information. For analog signals, signal processing may involve the amplification and filtering of audio signals for audio equipment or the modulation and demodulation of signals for telecommunications. For digital signals, signal processing may involve the compression, error detection and error correction of digitally sampled signals.

Signal Processing is a very mathematically oriented and intensive area forming the core of digital signal processing and it is rapidly expanding with new applications in every field of electrical engineering such as communications, control, radar, TV/Audio/Video engineering, power electronics and bio-medical engineering as many already existing analog systems are replaced with their digital counterparts.

Although in the classical era, analog signal processing only provided a mathematical description of a system to be designed, which is actually implemented by the analog hardware engineers, Digital Signal Processing both provides a mathematical description of the systems to be designed and also actually implements them (either by software programming or by hardware embedding) without much dependency on hardware issues, which exponentiates the importance and success of DSP engineering.

The deep and strong relations between signals and the information they carry makes signal processing equivalent of information processing. Which is the reason why the field finds so many diversified applications. DSP processor ICs are found in every type of modern electronic systems and products including, SDTV | HDTV sets, radios and mobile communication devices, Hi-Fi audio equipments, Dolby noise reduction algorithms, GSM mobile phones, mp3 multimedia players, camcorders and digital cameras, automobile control systems, noise cancelling headphones, digital spectrum analyzers, intelligent missile guidance, radar, GPS based cruise control systems and all kinds of image processing, video processing, audio processing and speech processing systems.
Telecommunications
Main article: Telecommunications engineering
Milstar

Telecommunications engineering focuses on the transmission of information across a channel such as a coax cable, optical fiber or free space. Transmissions across free space require information to be encoded in a carrier wave in order to shift the information to a carrier frequency suitable for transmission, this is known as modulation. Popular analog modulation techniques include amplitude modulation and frequency modulation. The choice of modulation affects the cost and performance of a system and these two factors must be balanced carefully by the engineer.

Once the transmission characteristics of a system are determined, telecommunication engineers design the transmitters and receivers needed for such systems. These two are sometimes combined to form a two-way communication device known as a transceiver. A key consideration in the design of transmitters is their power consumption as this is closely related to their signal strength. If the signal strength of a transmitter is insufficient the signal's information will be corrupted by noise.
Instrumentation
Main article: Instrumentation engineering
Radar gun

Instrumentation engineering deals with the design of devices to measure physical quantities such as pressure, flow and temperature. The design of such instrumentation requires a good understanding of physics that often extends beyond electromagnetic theory. For example, radar guns use the Doppler effect to measure the speed of oncoming vehicles. Similarly, thermocouples use the Peltier-Seebeck effect to measure the temperature difference between two points.

Often instrumentation is not used by itself, but instead as the sensors of larger electrical systems. For example, a thermocouple might be used to help ensure a furnace's temperature remains constant. For this reason, instrumentation engineering is often viewed as the counterpart of control engineering.
Computers
Main article: Computer engineering
Personal digital assistant

Computer engineering deals with the design of computers and computer systems. This may involve the design of new hardware, the design of PDAs or the use of computers to control an industrial plant. Computer engineers may also work on a system's software. However, the design of complex software systems is often the domain of software engineering, which is usually considered a separate discipline. Desktop computers represent a tiny fraction of the devices a computer engineer might work on, as computer-like architectures are now found in a range of devices including video game consoles and DVD players.
Related disciplines

Mechatronics is an engineering discipline which deals with the convergence of electrical and mechanical systems. Such combined systems are known as electromechanical systems and have widespread adoption. Examples include automated manufacturing systems, heating, ventilation and air-conditioning systems and various subsystems of aircraft and automobiles.

The term mechatronics is typically used to refer to macroscopic systems but futurists have predicted the emergence of very small electromechanical devices. Already such small devices, known as Microelectromechanical systems (MEMS), are used in automobiles to tell airbags when to deploy, in digital projectors to create sharper images and in inkjet printers to create nozzles for high definition printing. In the future it is hoped the devices will help build tiny implantable medical devices and improve optical communication.[31]

Biomedical engineering is another related discipline, concerned with the design of medical equipment. This includes fixed equipment such as ventilators, MRI scanners and electrocardiograph monitors as well as mobile equipment such as cochlear implants, artificial pacemakers and artificial hearts.

Saturday, May 29, 2010

Telephone Cables


Telephone Cables


Telephone cables are the backbone of any country's telecommunication structure. Without their help any organization is unable to work properly and efficiently. Usually a telephone cable is a multi conductor cable constituting of twisted pairs for the purpose of telephone audio use.

Telephone cables are available in different lengths and colors. Usually they have a PVC jacket to ensure a durable line cord that make possible their extensive use. Generally it is constructed from a copper wire with a high-micron, gold-and-nickel-plated termination. The specific properties of these materials ensure excellent sound and data transfer.





Telephone Cable Materials
The materials used for constructing the telephone cables should be such that the transmission of signals and data must be uniform and clear. Usually they are made of homogeneous mixtures of highly refined hydrocarbons. They are petrolatum based with added elastomer and polymers. Such materials are added to get their unique characteristics.


Telephone Cable Types
Cable provides the medium through which data and information is transferred from one network device to other in the form of analog signals. Different types of cables are required for varieties of applications. For the successful functioning of a network, it is necessary to understand the features of different types of cable.
Copper cable
Fiber optic cable
Pressurization of Telephone Cables
Moisture is the main threat to telephone cables (conductor pairs). Paper or pulp is used as insulation between the layer of individual conductor pairs made of copper. It provides magnificent insulation characteristics as long as it remain dry. For a long time pulp has been used for insulating the telephone cables. It had almost no competition from any other material. But in recent years plastic insulated conductor (PIC) cable has occupied its position strongly in the market and has acquired the top spot.

The telephone cables are under grounded almost 7 feet below the surface. If the cables are surrounded with water then for each foot of water level above the cable approximately 0.43 Pounds per Square Inch (PSI) of pressure is applied. There will be a lot of water pressure bearing down on the cable. In case of any crack in the cable, water will pervade and will damage the conductor. The pressure within the cable should be in excess of the pressure that could be exerted by the water. To acquire this particular objective, telephone companies have declared a minimum air pressure standards for cables in different environments.

Telephone Cable Installation Tips
Never install the telephone cables in the holes containing high voltage wiring. It is a very common mistake. Doing this will result in bringing the telephone cables close and parallel to high voltage wiring. It will result in interference on the telephone wire. The electricity flowing through the high voltage wire can create electromagnetic field in the telephone cable and it can disturb the communication through the wire and might create noise. The telephone cables should be kept at least 16 to 24 inches away from high voltage wires. And it is possible to drill a separate hole for telephone cables.

Type and Size of Telephone Cables
The type and size of telephone cables should be appropriate according to the need. 22 or 24 gauge twisted pair solid conductor wire is generally preferred. 6 conductor wire should be used instead of 4 conductor so that 6 wires are grouped together inside the outer insulation

Thursday, May 27, 2010

Electrical switch


Electrical switch


An electrical switch is a commonly used device for making, breaking, or changing the course of an electric circuit. There are different types of electrical switches being manufactured for use in different applications.

Electrical SwitchElectrical Switch

Composition of Electrical Switches
It consists of two or more contacts that are mounted on an insulating structure and is so arranged that they can be moved into and out of contact with each other with the help of a suitable operating mechanism.

The two contacts in a switch are made of metal and the metal is chosen keeping in mind the resistance to corrosion, as most metals are likely to form insulating oxides, which further prevents the switch from working. Contacts in a switch are often plated with noble metal. The switch also has an actuator - a moving part that is used for applying operating force to the contacts.